ECT on AVM C2 or A1 card

Discussion:

(too old to reply)

Nagy Gyõzõ

2005-06-22 13:01:31 UTC

Hi Everyone!

I've made an application wich should make an ECT on a PABX. I dial the first
number, put it on hold, then dial the second number and after the connect
send a FacilityReq.
I get an answer from capi -> Invoke Problem, Unrecognized operation.

When I change the ISDN card to Eicon Diva server BRI all is working.

The trace is at the bottom

I've made an ISDN trace too. Here are the most important moments:

ISDN trace:

ISDN LAYER 3

Protocol Discriminator : 0x08

Call Reference Length : 1

Call Reference Flag : Call Origin Side

Call Reference Value : 0x09

Message Type : FACILITY

Cause : -

Information Element Identifier : FACILITY

Information Element Length : 14

Hex. Value : 91 A1 0B 02 01

: AB 06 06 04 00 82 71 01
04

Service discr : Suppl.applica.

COMPONENT : Invoke

: Component LI = 11

InvokeID(hex) : AB

operat.Val.Gl : LI 06

: Ccitt id-org

: Etsi

: 369

: Oper&errors(1)

: EctLinkIdRequest

0000: 00 83 08 0A 08 01 09 62 1C 0E 91 A1 0B 02 01 AB
.......b........

0010: 06 06 04 00 82 71 01 04 .....q..

Capi Trace:

14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityRequestParameter = <06 00 04 01 01 00 00>

The full capi trace is:

--------------------------------------------------------------------------------
CAPIkTrc CAPI 2.0 Kernel Trace Driver v2.0 Build Date 11:29:21 Jun 30 2003

(c) AVM Berlin
--------------------------------------------------------------------------------
Tracing CAPI device "capi201"

14:32:59.814 Tue, Jun 21 2005
=== Target Device Query ===
Manufacturer: AVM-GmbH
Number of Controllers: 1

--- Controller Nr. 1 ---
Serial Number: 000001a
CAPI Version: 2.0
Manufacturer Version (AVM): 3.10-02 (49.2)
Profile:
01 00 02 00 39 00 00 00 - 1F 01 00 40 1B 0B 00 00 ....9...........
BF 00 00 80 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 01 00 00 01 ................
00 02 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Total Number of BChannels: 2
-------------------------------------------------

14:32:59.814 Tue, Jun 21 2005
--------------------------------------------------------------------------------
Start Tracing
Settings:
CAPI functions: NO
CAPI messages: YES
MaxDataB3Bytes: 0
CAPI ManuMessages: YES
UserMode Appls: YES

--------------------------------------------------------------------------------

14:33:07.475 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010032
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default

14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>

14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <00 00 00>

14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010032
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default

14:33:07.495 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>

14:33:07.875 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000

14:33:08.276 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>

14:33:08.677 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <00 00 06 00 00 ff 03 00 00>

14:33:09.077 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000

14:33:09.478 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>

14:33:16.287 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_IND 37 Byte ApplID: 2 MsgNr: 317
Controller/PLCI/NCCI = 0x00000101
CIPValue = 0x0001
CalledPartyNumber = <80>2007
CallingPartyNumber = <00 80>7202
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default

14:33:16.287 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
ALERT_REQ 13 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
AdditionalInfo = default

14:33:16.308 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_RESP 28 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Reject = 0x0000
BProtocol
B1protocol = 0x0001
B2protocol = 0x0001
B3protocol = 0x0000
B1configuration = default
B2configuration = default
B3configuration = default
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
AdditionalInfo = default

14:33:16.718 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 2 MsgNr: 318
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0070
InfoElement = <80>2007

14:33:16.718 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101

14:33:17.129 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 2 MsgNr: 319
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0018
InfoElement = <89>

14:33:17.129 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101

14:33:17.539 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
ALERT_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Info = 0x0000

14:33:17.940 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 2 MsgNr: 320
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0018
InfoElement = <89>

14:33:17.940 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101

14:33:18.350 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_IND 15 Byte ApplID: 2 MsgNr: 321
Controller/PLCI/NCCI = 0x00000101
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default

14:33:18.350 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101

14:33:18.751 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_IND 13 Byte ApplID: 2 MsgNr: 322
Controller/PLCI/NCCI = 0x00010101
NCPI = default

14:33:18.751 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_RESP 15 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101
Reject = 0x0000
NCPI = default

14:33:19.152 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_IND 13 Byte ApplID: 2 MsgNr: 323
Controller/PLCI/NCCI = 0x00010101
NCPI = default

14:33:19.152 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101

14:33:20.934 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityRequestParameter = <02 00 00>

14:33:20.954 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <02 00 02 00 00>

14:33:21.034 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_IND 20 Byte ApplID: 2 MsgNr: 332
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityIndicationParameter = <02 00 02 00 00>

14:33:21.034 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_RESP 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityResponseParameters = <02 00 00>

14:33:21.074 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_IND 15 Byte ApplID: 2 MsgNr: 333
Controller/PLCI/NCCI = 0x00010101
Reason_B3 = 0x3301
NCPI = default

14:33:21.074 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101

14:33:24.169 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010022
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default

14:33:24.169 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>

14:33:24.179 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <00 00 00>

14:33:24.199 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_REQ 43 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
CIPValue = 0x0010
CalledPartyNumber = <80>7020
CallingPartyNumber = <01 80>2007
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x0001
B2protocol = 0x0001
B3protocol = 0x0000
B1configuration = default
B2configuration = default
B3configuration = default
BC = default
LLC = default
HLC = default
AdditionalInfo = default

14:33:24.569 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000

14:33:24.970 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>

14:33:25.371 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 26 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <00 00 06 00 00 ff 03 00 00>

14:33:25.771 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
Info = 0x0000

14:33:26.172 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 15 Byte ApplID: 3 MsgNr: 334
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x8002
InfoElement = default

14:33:26.172 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:26.572 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 17 Byte ApplID: 3 MsgNr: 335
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001e
InfoElement = <81 88>

14:33:26.572 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:26.973 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 3 MsgNr: 336
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0018
InfoElement = <89>

14:33:26.973 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:27.383 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 15 Byte ApplID: 3 MsgNr: 337
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x8001
InfoElement = default

14:33:27.383 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:27.794 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 17 Byte ApplID: 3 MsgNr: 338
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001e
InfoElement = <81 88>

14:33:27.794 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:28.195 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 3 MsgNr: 339
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0029
InfoElement = <05 06 15 0e 1e>

14:33:28.195 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_IND 21 Byte ApplID: 3 MsgNr: 340
Controller/PLCI/NCCI = 0x00000201
ConnectedNumber = <00 80>7020
ConnectedSubaddress = default
LLC = default

14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_REQ 13 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
NCPI = default

14:33:29.016 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
Info = 0x0000

14:33:29.416 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_IND 13 Byte ApplID: 3 MsgNr: 341
Controller/PLCI/NCCI = 0x00010201
NCPI = default

14:33:29.416 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201

14:33:34.203 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_REQ 13 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
NCPI = default

14:33:34.213 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
Info = 0x0000

14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_IND 15 Byte ApplID: 3 MsgNr: 363
Controller/PLCI/NCCI = 0x00010201
Reason_B3 = 0x3301
NCPI = default

14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201

14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityRequestParameter = <06 00 04 01 01 00 00>

14:33:34.253 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <06 00 02 00 00>

14:33:34.353 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_IND 20 Byte ApplID: 3 MsgNr: 364
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityIndicationParameter = <06 00 02 01> 37?

14:33:34.353 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_RESP 18 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityResponseParameters = <06 00 00>

14:33:34.373 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 24 Byte ApplID: 3 MsgNr: 365
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001c
InfoElement = <91 a4 06 02 01 ad 81 01 01>

14:33:34.373 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:33:34.394 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 3 MsgNr: 366
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0070
InfoElement = <80>2007

14:33:34.394 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201

14:37:16.763 Tue, Jun 21 2005
--------------------------------------------------------------------------------
Stop Tracing
--------------------------------------------------------------------------------

Jochen Klein

2005-06-24 08:34:13 UTC

Permalink

Nagy,

I guess your P(A)BX does only support ECT(I) but not ECT(E). The Eicon
cards, well drivers/capi (at least in some versions) are "translating" the
CAPI ECT(E) request in D-channel ECT(I), while on AVM cards I did not yet
see such bahavior.
So just issue CAPI ECT with implicit linkage request in your application,
and youve got a good chnace itŽll work.

Regrads,
Jochen Klein
www.servonic.com

Post by Nagy GyÃµzÃµ
Hi Everyone!
I've made an application wich should make an ECT on a PABX. I dial the first
number, put it on hold, then dial the second number and after the connect
send a FacilityReq.
I get an answer from capi -> Invoke Problem, Unrecognized operation.
When I change the ISDN card to Eicon Diva server BRI all is working.
The trace is at the bottom
ISDN LAYER 3
Protocol Discriminator : 0x08
Call Reference Length : 1
Call Reference Flag : Call Origin Side
Call Reference Value : 0x09
Message Type : FACILITY
Cause : -
Information Element Identifier : FACILITY
Information Element Length : 14
Hex. Value : 91 A1 0B 02 01
: AB 06 06 04 00 82 71 01
04
Service discr : Suppl.applica.
COMPONENT : Invoke
: Component LI = 11
InvokeID(hex) : AB
operat.Val.Gl : LI 06
: Ccitt id-org
: Etsi
: 369
: Oper&errors(1)
: EctLinkIdRequest
0000: 00 83 08 0A 08 01 09 62 1C 0E 91 A1 0B 02 01 AB
.......b........
0010: 06 06 04 00 82 71 01 04 .....q..
14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityRequestParameter = <06 00 04 01 01 00 00>
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
CAPIkTrc CAPI 2.0 Kernel Trace Driver v2.0 Build Date 11:29:21 Jun 30 2003
(c) AVM Berlin
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
Tracing CAPI device "capi201"
14:32:59.814 Tue, Jun 21 2005
=== Target Device Query ===
Manufacturer: AVM-GmbH
Number of Controllers: 1
--- Controller Nr. 1 ---
Serial Number: 000001a
CAPI Version: 2.0
Manufacturer Version (AVM): 3.10-02 (49.2)
01 00 02 00 39 00 00 00 - 1F 01 00 40 1B 0B 00 00 ....9...........
BF 00 00 80 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 01 00 00 01 ................
00 02 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Total Number of BChannels: 2
-------------------------------------------------
14:32:59.814 Tue, Jun 21 2005
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
Start Tracing
CAPI functions: NO
CAPI messages: YES
MaxDataB3Bytes: 0
CAPI ManuMessages: YES
UserMode Appls: YES
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
14:33:07.475 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010032
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default
14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>
14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <00 00 00>
14:33:07.485 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010032
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default
14:33:07.495 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>
14:33:07.875 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
14:33:08.276 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>
14:33:08.677 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 26 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <00 00 06 00 00 ff 03 00 00>
14:33:09.077 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
14:33:09.478 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>
14:33:16.287 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_IND 37 Byte ApplID: 2 MsgNr: 317
Controller/PLCI/NCCI = 0x00000101
CIPValue = 0x0001
CalledPartyNumber = <80>2007
CallingPartyNumber = <00 80>7202
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
14:33:16.287 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
ALERT_REQ 13 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
AdditionalInfo = default
14:33:16.308 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_RESP 28 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Reject = 0x0000
BProtocol
B1protocol = 0x0001
B2protocol = 0x0001
B3protocol = 0x0000
B1configuration = default
B2configuration = default
B3configuration = default
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
AdditionalInfo = default
14:33:16.718 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 2 MsgNr: 318
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0070
InfoElement = <80>2007
14:33:16.718 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
14:33:17.129 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 2 MsgNr: 319
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0018
InfoElement = <89>
14:33:17.129 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
14:33:17.539 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
ALERT_CONF 14 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Info = 0x0000
14:33:17.940 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 2 MsgNr: 320
Controller/PLCI/NCCI = 0x00000101
InfoNumber = 0x0018
InfoElement = <89>
14:33:17.940 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
14:33:18.350 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_IND 15 Byte ApplID: 2 MsgNr: 321
Controller/PLCI/NCCI = 0x00000101
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
14:33:18.350 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
14:33:18.751 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_IND 13 Byte ApplID: 2 MsgNr: 322
Controller/PLCI/NCCI = 0x00010101
NCPI = default
14:33:18.751 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_RESP 15 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101
Reject = 0x0000
NCPI = default
14:33:19.152 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_IND 13 Byte ApplID: 2 MsgNr: 323
Controller/PLCI/NCCI = 0x00010101
NCPI = default
14:33:19.152 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101
14:33:20.934 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityRequestParameter = <02 00 00>
14:33:20.954 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <02 00 02 00 00>
14:33:21.034 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_IND 20 Byte ApplID: 2 MsgNr: 332
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityIndicationParameter = <02 00 02 00 00>
14:33:21.034 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_RESP 18 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00000101
FacilitySelector = 0x0003
FacilityResponseParameters = <02 00 00>
14:33:21.074 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_IND 15 Byte ApplID: 2 MsgNr: 333
Controller/PLCI/NCCI = 0x00010101
Reason_B3 = 0x3301
NCPI = default
14:33:21.074 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_RESP 12 Byte ApplID: 2 MsgNr: 0
Controller/PLCI/NCCI = 0x00010101
14:33:24.169 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_REQ 26 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
InfoMask = 0x000001ff
CIPmask = 0x04010022
CIPmask2 = 0x00000000
CallingPartyNumber = default
CallingPartySubaddress = default
14:33:24.169 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <01 00 04 1f 00 00 00>
14:33:24.179 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 18 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
FacilitySelector = 0x0003
FacilityRequestParameter = <00 00 00>
14:33:24.199 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_REQ 43 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
CIPValue = 0x0010
CalledPartyNumber = <80>7020
CallingPartyNumber = <01 80>2007
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x0001
B2protocol = 0x0001
B3protocol = 0x0000
B1configuration = default
B2configuration = default
B3configuration = default
BC = default
LLC = default
HLC = default
AdditionalInfo = default
14:33:24.569 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
LISTEN_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
14:33:24.970 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <01 00 02 00 00>
14:33:25.371 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 26 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000001
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <00 00 06 00 00 ff 03 00 00>
14:33:25.771 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
Info = 0x0000
14:33:26.172 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 15 Byte ApplID: 3 MsgNr: 334
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x8002
InfoElement = default
14:33:26.172 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:26.572 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 17 Byte ApplID: 3 MsgNr: 335
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001e
InfoElement = <81 88>
14:33:26.572 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:26.973 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 16 Byte ApplID: 3 MsgNr: 336
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0018
InfoElement = <89>
14:33:26.973 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:27.383 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 15 Byte ApplID: 3 MsgNr: 337
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x8001
InfoElement = default
14:33:27.383 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:27.794 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 17 Byte ApplID: 3 MsgNr: 338
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001e
InfoElement = <81 88>
14:33:27.794 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:28.195 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 3 MsgNr: 339
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0029
InfoElement = <05 06 15 0e 1e>
14:33:28.195 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_IND 21 Byte ApplID: 3 MsgNr: 340
Controller/PLCI/NCCI = 0x00000201
ConnectedNumber = <00 80>7020
ConnectedSubaddress = default
LLC = default
14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_ACTIVE_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:28.605 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_REQ 13 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
NCPI = default
14:33:29.016 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
Info = 0x0000
14:33:29.416 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_IND 13 Byte ApplID: 3 MsgNr: 341
Controller/PLCI/NCCI = 0x00010201
NCPI = default
14:33:29.416 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
CONNECT_B3_ACTIVE_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
14:33:34.203 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_REQ 13 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
NCPI = default
14:33:34.213 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_CONF 14 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
Info = 0x0000
14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_IND 15 Byte ApplID: 3 MsgNr: 363
Controller/PLCI/NCCI = 0x00010201
Reason_B3 = 0x3301
NCPI = default
14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
DISCONNECT_B3_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00010201
14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityRequestParameter = <06 00 04 01 01 00 00>
14:33:34.253 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_CONF 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
Info = 0x0000
FacilitySelector = 0x0003
FacilityConfirmationParameter = <06 00 02 00 00>
14:33:34.353 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_IND 20 Byte ApplID: 3 MsgNr: 364
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityIndicationParameter = <06 00 02 01> 37?
14:33:34.353 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_RESP 18 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityResponseParameters = <06 00 00>
14:33:34.373 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 24 Byte ApplID: 3 MsgNr: 365
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x001c
InfoElement = <91 a4 06 02 01 ad 81 01 01>
14:33:34.373 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:33:34.394 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_IND 20 Byte ApplID: 3 MsgNr: 366
Controller/PLCI/NCCI = 0x00000201
InfoNumber = 0x0070
InfoElement = <80>2007
14:33:34.394 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
INFO_RESP 12 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
14:37:16.763 Tue, Jun 21 2005
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
Stop Tracing
--------------------------------------------------------------------------

------

Nagy Gyõzõ

2005-06-24 10:03:22 UTC

Permalink

Hallo Jochen!

Thank you for your answer.

I think, that ECT (E) is when user calls a number, put it on hold, then
calls the another party, wait for the answer, and when conneted make an ECT.
The ECT(I) is when at the second call the user doesn't wait for the connect.

Is that rigth? When it is, the pabx supports ECT(E) because with eicon it is
working.

Or what is the difference in ECT(I) and ECT(E)? How can i make ECT(I)
statt ECT(E)

Thax a lot: gyozo

Post by Jochen Klein
Nagy,
I guess your P(A)BX does only support ECT(I) but not ECT(E). The Eicon
cards, well drivers/capi (at least in some versions) are "translating" the
CAPI ECT(E) request in D-channel ECT(I), while on AVM cards I did not yet
see such bahavior.
So just issue CAPI ECT with implicit linkage request in your application,
and youve got a good chnace itŽll work.
Regrads,
Jochen Klein
www.servonic.com

Post by Nagy GyÃµzÃµ
Hi Everyone!
I've made an application wich should make an ECT on a PABX. I dial the

first

Post by Nagy GyÃµzÃµ
number, put it on hold, then dial the second number and after the connect
send a FacilityReq.
I get an answer from capi -> Invoke Problem, Unrecognized operation.
When I change the ISDN card to Eicon Diva server BRI all is working.
The trace is at the bottom
ISDN LAYER 3
Protocol Discriminator : 0x08
Call Reference Length : 1
Call Reference Flag : Call Origin Side
Call Reference Value : 0x09
Message Type : FACILITY
Cause : -
Information Element Identifier : FACILITY
Information Element Length : 14
Hex. Value : 91 A1 0B 02 01
: AB 06 06 04 00 82 71

Post by Nagy GyÃµzÃµ
04
Service discr : Suppl.applica.
COMPONENT : Invoke
: Component LI = 11
InvokeID(hex) : AB
operat.Val.Gl : LI 06
: Ccitt id-org
: Etsi
: 369
: Oper&errors(1)
: EctLinkIdRequest
0000: 00 83 08 0A 08 01 09 62 1C 0E 91 A1 0B 02 01 AB
.......b........
0010: 06 06 04 00 82 71 01 04 .....q..
14:33:34.233 Tue, Jun 21 2005
ApplName: C:\Program Files\Microsoft Visual Studio\VB98\VB6.EXE
FACILITY_REQ 22 Byte ApplID: 3 MsgNr: 0
Controller/PLCI/NCCI = 0x00000201
FacilitySelector = 0x0003
FacilityRequestParameter = <06 00 04 01 01 00 00>
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
CAPIkTrc CAPI 2.0 Kernel Trace Driver v2.0 Build Date 11:29:21 Jun 30

2003

Post by Nagy GyÃµzÃµ
(c) AVM Berlin
--------------------------------------------------------------------------

------

Post by Nagy GyÃµzÃµ
Stop Tracing
--------------------------------------------------------------------------

------

Jochen Klein

2005-06-27 10:35:43 UTC

Permalink

Hello Nagy,

Post by Nagy GyÃµzÃµ
I think, that ECT (E) is when user calls a number, put it on hold, then
calls the another party, wait for the answer, and when conneted make an ECT.
The ECT(I) is when at the second call the user doesn't wait for the connect.

No, youre mixing up ICT and ECT. See ETSI EN 300 367 and related for
D-Channel technical description of ECT.

Post by Nagy GyÃµzÃµ
Is that rigth?

No.

Post by Nagy GyÃµzÃµ
When it is, the pabx supports ECT(E) because with eicon it is working.

Well, so, No also ofcourse ;-)
As I wrote in my last posting, Ecion has something (call it feature, call it
bug, call it option, or call it something else), which "translates" CAPI
ECT(E) into DSS D-Channel ECT(I).

Post by Nagy GyÃµzÃµ
Or what is the difference in ECT(I) and ECT(E)? How can i make ECT(I)

statt ECT(E)
Have a look at ETSI EN 300 367 an related docs if youre interested in
understanding what happens on the D-channel or just follow the advise in my
last posting, to just to issue a CAPI ECT request with *implicit* linkage
instead of explicit linkage (bot options are described in CAPI 2.0 4th
edition, Part 3, Chapter C 5.5.1) if youre just interested that it works but
dont realy care about (technical) why.

Regards,
Jochen Klein
www.servonic.com